Release Notes


Last Update : Oct. 20, 1997

BIOS Version : V1.2L21

Applied Model : All units of CF-25 Series

Change timing : From production of serial number 7Axxxxxxxx (January '97)

Reason of change :

1.This BIOS supports to switch the display by function key "Fn + F3".(LCD/CRT/Simul.)

2.This BIOS are released for customer support.


BIOS Version : V1.1L20

Applied Model : All units of CF-25 Series

Change timing : From production of serial number 7Axxxxxxxx (January '97)

Reason of change :

1.Fixed the resume error that occurred when performing resume if the hibernation is done after Warm Boot without

turning off the power, when accessing CD-ROM with CD-ROM drive of option installed.


BIOS Version : V1.1L17

Applied Model : All units of CF-25 Series

Change timing : From production of serial number 7Axxxxxxxx (January '97)

Reason of change :

1.Improve that system does not recognize HITACHI's 16MB DIMM.

2.Improve that system does not boot-up when performing resume on disabling sound.

3.Improve that System occur the parity error when booting-up ,after Serial off on inserting Megaheltz Modem.

4.Change the timing for executing AutoConfig from 3 times POST failure to 7 times POST failure.


BIOS Version : V1.1L11

Applied Model : All units of CF-25 Series

Change timing : From production of serial number 6Lxxxxxxxx (December '96)

Reason of change :

1.Improve that system improperly return from Hibernation mode when expanding RAM Module of 64MB.

2.Improve that sound does not work in the following condition.

Master Volume is set to Mute when returning from Hibernation to Resume, after the set of sound changed from fixed port

(e.g.230) to PnP with WSET of Windows95.